Tyre rotation, and what to do when front and rear sizes differ
The tyres at each corner of your car wear at different rates. Rotating them, moving each tyre to a different position at regular intervals, evens out that wear so the four tyres last longer and can be replaced together. If your car has different tyre sizes front and rear, the rules change, and this guide covers that too.
Why tyres wear unevenly
Front tyres do the steering. Every turn scrubs their shoulders, so they usually wear faster than the rears.
The driven wheels wear faster. Most Indian cars are front-wheel drive, so the fronts both steer and drive and wear fastest of all. On rear-wheel-drive cars the rears wear more than you might expect.
Weight is not even. The engine sits over the front axle on most cars.
Left alone, the front pair can be worn out while the rears still have plenty of tread. Rotation spreads the work across all four.
How often
Many shops suggest every 5,000 to 10,000 km, and many car makers schedule it with the regular service. Your owner's manual comes first. A good habit is to rotate at every service, and to have the wheels balanced at the same visit.
Rotation patterns
The right pattern depends on which wheels drive the car and on the type of tyre.
Your car
Pattern
What moves where
Front-wheel drive (most hatchbacks and sedans)
Forward cross
Fronts go straight back; rears cross to the opposite side at the front
Rear-wheel drive, four-wheel drive or all-wheel drive
Rearward cross
Rears go straight forward; fronts cross to the opposite side at the rear
Any car, alternative
X pattern
Every tyre moves diagonally: front left to rear right, and so on
Directional tyres (arrow on the sidewall)
Front to back
Fronts go straight back and rears straight forward, on the same side only
Directional tyres have a tread designed to roll one way, shown by an arrow on the sidewall. Moving one to the other side of the car would make it roll backwards, so they only move front to back on the same side.
A full-size spare that matches the other four can join the rotation, so all five share the wear. A space-saver or a spare of a different size must stay out of it.
When front and rear sizes are different
Some cars, often performance or luxury models, have wider tyres at the rear than at the front, for example 225/45 R18 at the front and 255/40 R18 at the rear. This is called a staggered fitment. Your door-frame sticker or owner's manual lists both sizes.
On a staggered car:
Front and rear tyres can never swap. They are different sizes, and fitting a rear tyre at the front (or the reverse) is unsafe and may not even fit.
Side-to-side swaps may be possible, left to right on the same axle, if the tyres are not directional. Many staggered cars use asymmetric tyres (marked "outside" on one sidewall); these can swap sides because the wheel and tyre move together and the outside stays outside.
Directional tyres on a staggered car usually cannot be rotated at all without taking each tyre off its rim and refitting it the other way round, which is rarely worth it.
Some cars also have different rims front and rear, even with the same tyre size. Check before swapping wheels between axles.
With little or no rotation possible, a staggered car usually wears out one axle before the other, most often the rear on a rear-wheel-drive car. That is normal. Plan to replace tyres one axle at a time, as a pair, and check the tread depth on both axles at every service (see our guide on when to change your tyres).
Things to check after a rotation
Tyre pressures. Front and rear pressures are often different. After a rotation, set each tyre to the pressure for its new position, from the door-frame sticker.
Tyre pressure sensors. On cars with a tyre pressure monitoring system that shows each wheel's pressure, the car may need to relearn which sensor is where. The shop can do this, or the owner's manual explains how.
Wheel nuts. They should be tightened to the car maker's torque. Check them again after the first 50 to 100 km.
Vibration. If you feel a new vibration after a rotation, have the wheels balanced (see our guide on alignment and balancing).
Rotation and your next tyres on OutOfBox
Regular rotation means your tyres wear out together, so you can replace all four at once and keep the same brand and pattern on the car.
If your car has different front and rear sizes, start your need from your car rather than a tyre size, and say how many front and how many rear tyres you need. Shops then quote per axle. If only one axle needs tyres, ask for just that pair. Our guide on ordering tyres for a staggered car walks through it step by step.