Loading

Wheel alignment and balancing explained

Alignment and balancing are the two jobs that most affect how long your tyres last after they are fitted. They sound alike, but they fix different problems. Alignment sets the angle of the wheels; balancing makes each wheel spin evenly.

Wheel alignment: the angle of the wheels

Alignment adjusts the angles at which the wheels meet the road, so they point straight ahead and sit upright when you drive straight. A machine measures three angles and the technician adjusts the steering and suspension to the car maker's figures:

  • Toe: whether the fronts of the wheels point in or out, seen from above. Wrong toe is the most common cause of fast, uneven wear.

  • Camber: whether the tops of the wheels lean in or out, seen from the front. Too much wears one edge of the tread.

  • Caster: the angle of the steering axis, seen from the side. It affects how the steering returns to centre and how stable the car feels at speed.

Potholes, speed breakers taken fast and kerbs knock these angles out over time.

Signs you need alignment

  • The car pulls to one side on a straight, flat road.

  • The steering wheel is off-centre when you drive straight.

  • One edge of a tyre is wearing faster than the other, or the tread has a feathered, saw-tooth feel.

  • The tyres squeal on gentle turns.

Wheel balancing: an even spin

No tyre and wheel is perfectly even in weight. Balancing spins each wheel on a machine, finds the heavy spot and adds small weights to the rim to even it out. An unbalanced wheel hops and wobbles as it spins, which you feel as vibration and which wears the tyre in patches.

Signs you need balancing

  • Vibration in the steering wheel, usually starting at around 60 to 100 km/h (a front wheel).

  • Vibration through the seat or floor (a rear wheel).

  • Patchy, scalloped wear on the tread.

  • A balance weight has fallen off the rim.

Alignment vs balancing at a glance

Alignment

Balancing

What it fixes

The angle of the wheels

Uneven weight around each wheel

What you notice

Pulling, off-centre steering, edge wear

Vibration at speed, patchy wear

How it is done

Adjusting steering and suspension

Adding small weights to the rim

Where

At the shop, on an alignment machine

At the shop or by a mobile fitter

When to get them done

  • With new tyres. Balancing is part of fitting a tyre. Alignment is strongly advised with new tyres too: badly aligned wheels can wear a new tyre unevenly within a few thousand kilometres.

  • After a hard knock on a pothole or kerb, or after any steering or suspension work.

  • When you notice any of the signs above.

  • As a routine check, many shops suggest every 5,000 to 10,000 km. Follow your car maker's service schedule.

Rotating your tyres

Front tyres wear faster than rear ones on most cars, because they steer and, on most Indian cars, also drive. Swapping front and rear tyres at regular intervals, often every 5,000 to 10,000 km, evens out the wear so all four last longer. A shop can rotate and rebalance them at the same visit.

Alignment with your OutOfBox order

If the shop offers alignment, its offer shows the price, and you pay it at the shop. With fitting at the shop or by valet, it is done in the same visit. With mobile fitting, the fitter balances the wheels but a van cannot align them, so you take the car to the shop for alignment within the window shown on your order. We remind you before the window ends.

Ready for new tyres?

Post your car and tyre size on OutOfBox. Shops near your service location send you quotes, with alignment shown where they offer it.