Loading

When to change your tyres

A tyre needs changing when its tread is worn down, when it is damaged, or when it is simply too old, even if it looks fine. Most drivers only check the first. Here is how to check all three in a few minutes.

1. Check the tread depth

Tread grooves carry water out from under the tyre. As they wear, the tyre grips less on wet roads and takes longer to stop. This matters most in the monsoon.

Every car tyre has tread wear indicators: small raised bars at the bottom of the main grooves, set at 1.6 mm. Look for a small triangle or the letters TWI on the shoulder of the tyre; the bar sits in the groove in line with it.

  • If the tread is level with the bar anywhere on the tyre, change it now.

  • Many tyre makers and safety bodies advise changing at about 3 mm, because wet braking gets noticeably worse below that.

  • A tread depth gauge costs very little and gives you a real number. Any tyre shop will measure it for free.

Check across the whole width and all the way round. A tyre worn on one edge only points to an alignment or pressure problem (see our guide on alignment and balancing).

2. Look for damage

Walk round the car and look at each sidewall and the tread. Change the tyre, or have a shop look at it, if you see:

  • A bulge or bubble on the sidewall. The inside structure is broken and the tyre can fail without warning. Do not drive far on it.

  • Cuts or cracks deep enough to see the cords, or many fine cracks across the sidewall.

  • A puncture in the sidewall or shoulder. Only punctures in the central tread can be repaired safely.

  • Something stuck in the tread, such as a nail or a stone wedged deep in a groove.

3. Notice how the car feels

A new vibration at highway speed, a pull to one side, more road noise, or a tyre that keeps losing pressure can all mean a tyre problem. Sometimes it is only balancing or alignment; a shop can tell you which.

4. Check the tyre's age

Rubber ages even when the tyre is not used. Heat, sun and ozone slowly harden it, so an old tyre grips less even with plenty of tread left. Cars that do little running, and spare tyres, are the usual case.

The age is in the DOT code on the sidewall. Find the word DOT, then the last four digits at the end of that line, often inside an oval:

DOT digits

Made in

1225

Week 12 of 2025 (late March 2025)

4724

Week 47 of 2024 (late November 2024)

0326

Week 3 of 2026 (mid January 2026)

Most tyre makers advise having tyres older than five years checked every year by a professional, and replacing any tyre ten years after it was made, whatever its tread depth. Your tyre brand's own advice comes first.

5. Check your spare

The spare is usually the oldest tyre on the car. Check its pressure every month and its DOT date once a year.

Changing one, two or four tyres

  • Change tyres in pairs on the same axle where you can, so both sides grip and wear the same.

  • If you change only two, tyre makers generally advise fitting the newer pair on the rear axle, because rear grip keeps the car stable when braking or cornering in the wet.

  • Keep the same size, load index and speed rating your car maker specifies (see our guide on reading a tyre size).

New tyres should be new

When you buy, ask how old the tyres are. Every offer on OutOfBox states the age band of the tyres the shop will fit, and the tyres fitted must be within that band. At fitting, the shop records the DOT dates and the age of each tyre, so you know exactly what went on your car. That record also supports any warranty claim with the tyre brand.

Get quotes when it is time

If your tyres fail any of these checks, post your car and tyre size on OutOfBox. Nearby shops send you quotes, and you choose the brand, the price and how you want the tyres fitted.